Availability: | |
---|---|
OVERVIEW
Passages(Gas): 4 Passages
Port Size: M5-G1/2'' optional
Port/Optional Pipe Size:4-14mm
Optional Passages(Gas+Electric ):1-128 Passages
Pneumatic Rotary Unions (Slip Rings) Parameters | |||||
Passages(Air, Gas) | 4-in,4-out | Pipe Size | Customed as request(M5, 1/8, 1/4, 3/8, 1/2 etc) | ||
Port Size | M5、G1/8''、G1/4''、G3/8''、G1/2'' Optional | Max. Operating Pressure | Normally in 1Mpa(high pressure optional) | ||
Electrical Parameters | |||||
Power | Signal | ||||
Spec. | Data | Spec. | Data | ||
Voltage range | 0-440VAC/VDC | Voltage range | 0-440VAC/VDC | ||
Insulation Resistance | ≥1000MΩ/500VDC | Insulation Resistance | ≥1000MΩ/500VDC | ||
Lead wire spec. | AWG16# Tinned Teflon | Lead wire spec. | AWG22# Tinned Teflon | ||
Rated current | customed as request | ||||
Electrical noise | 10mΩ@6VDC,50mA,5Rpm | ||||
Dynamic resistance change | <0.01Ω | ||||
Mechanical Parameters | |||||
Mechanical Performance | Environmental Performance | ||||
Spec. | Data | Spec. | Data | ||
Working Life | > 50 million for ref(depends on working conditions) | Operating Temperature | -30C°±80C° | ||
Rated Speed | 300rpm (can be customized ) | Working Humidity | 0-85%RH | ||
Contact Material | Precious Metal, gold to gold (can be customized ) | Mechanical Vibration | MIL-SID-810E | ||
Shell Material | Aluminum Alloy (surface hard oxidation treatment) | IP Grade | IP51( IP65、IP68 Optional) | ||
Rotational Torque | 0.1N.M;+0.03N.M/ channel, Depends on connection size |
Options (Based on requirements)
Specification
Combined with power and signals
Pipe and ports size
Housing Material(Stainless Steel,Aluminum Alloy)
Working Temperature
Waterproof or not
Working speed(rpm)
JSR-MPS04XX Multi-channel Pneumatic Rotary Union(Slip Rings) | |||||
Model NO. | Passage(gas) | Port Size | Pipe Size | Power Circuits(10A) | Signal Circuits(5A) |
MPS04XX-6P10 | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 6 | 0 |
MPS04XX-6S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 0 | 6 |
MPS04XX-P1210 | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 12 | 0 |
MPS04XX-6P10-6S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 6 | 6 |
MPS04XX-12S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 0 | 12 |
MPS04XX-18P10 | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 18 | 0 |
MPS04XX-6P10-12S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 6 | 12 |
MPS04XX-P1210-6S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 12 | 6 |
MPS04XX-18S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 0 | 18 |
MPS04XX-S24 | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 0 | 24 |
MPS04XX-6P10-18S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 6 | 18 |
MPS04XX-30S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 0 | 30 |
MPS04XX-36S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 0 | 36 |
Note: N pieces of 5A current loops can be used as 1 channel of N*5A current loop; For example, 2 rings 5A can be used as 1 circuit 10A.*If no standard models are suitable, contact us for custom solutions directly, thanks. |
DIMENSION DRAWING
It is only a drawing example here. Normally it is OEM models as our customer's request,
Every design is based on different requirement.
Color Code For Lead Wires
Ring No. | Wire Color | Ring No. | Wire Color |
1 | Black | 7 | Purple |
2 | Red | 8 | Grey |
3 | Yellow | 9 | Orange |
4 | Green | 10 | Brown |
5 | Blue | 11 | Transparent |
6 | White | 12 | Light Green |
(Note: 12 colors are a group, with serial numbers 1...12, the next group repeats the first 12 colors, and each group is identified by a number tube as the group serial number.) |
MODEL NO.
APPLICATION FIELD
Printing Industry, Machine Tools, Wind Turbines, Food Processing machines, Indexing tables, packaging machinery, pneumatic clamps, rotary filling machine, automated systems, spinning machines, textile equipment, labeling machines, conveying systems, welding equipment
PACKAGE & DELIVERY
Package is by carton or by wooden.
Delivery: By Air, by Express, or by sea. Up to customers’ request.
Pneumatic rotary unions, also known as Pneumatic slip rings, pneumatic rotary joints or swivels, are devices used to transfer pressurized flow, air or gases from a stationary source to a rotating mechanism. They are preserving and isolating the fluid connection when devices are in 360 degree rotating.
These Pneumatic rotary unions are particularly essential in various industries where continuous rotary motion is involved, such as manufacturing, automotive, packaging, printing, robotics, and more. They enable the seamless transfer of air or gases, allowing pneumatic tools, actuators, or other pneumatic devices to function efficiently while rotating.
Pneumatic rotary unions are designed with channels or passages that permit the flow of compressed air, flow, or gases ensuring a constant and uninterrupted supply of pneumatic power, even as the connected equipment rotates. They typically consist of precision-engineered components, including seals, bearings, housing, and inlet and outlet ports, ensuring minimal leakage and friction, thus maximizing efficiency and reliability.
Our design of pneumatic rotary unions can based on different application requirements. Such as pressure, speed, media type, size, and environmental conditions are important factors in selecting the appropriate rotary union for a given application.
Besides, our Pneumatic rotary unions are in many range of sizes and configurations, accommodating different pressures, speeds, and specialized applications. They may be built to manage high-pressure pneumatic systems or designed for low-speed, high-torque applications for option.
Pneumatic rotary unions Some features are include:
1)Rotational Capability
2)Pressure Handling
3)Low Friction Seals
4)High Rotational Speeds for option
5)Durability and Reliability
6)Corrosion Resistance
7)Configurable Ports for option
8)Temperature Resistance
9)Customization and combined optional
Some details requested before design a Pneumatic rotary union:
1)Operating Pressure and Flow Rate
2)Media Type
3)Speed and RPM
4)Number of Passages or Channels
5)Temperature Range
6)Installation Space and Mounting
7)Environmental Conditions
It is only some series model samples here. If it can not find the model you need.
Contact us here. Let us know with your requirements. Our JARCH designer & engineer team have the full experiences to custom design and produce high reliable slip rings/rotary unions/rotary joints/connectors for you.
OVERVIEW
Passages(Gas): 4 Passages
Port Size: M5-G1/2'' optional
Port/Optional Pipe Size:4-14mm
Optional Passages(Gas+Electric ):1-128 Passages
Pneumatic Rotary Unions (Slip Rings) Parameters | |||||
Passages(Air, Gas) | 4-in,4-out | Pipe Size | Customed as request(M5, 1/8, 1/4, 3/8, 1/2 etc) | ||
Port Size | M5、G1/8''、G1/4''、G3/8''、G1/2'' Optional | Max. Operating Pressure | Normally in 1Mpa(high pressure optional) | ||
Electrical Parameters | |||||
Power | Signal | ||||
Spec. | Data | Spec. | Data | ||
Voltage range | 0-440VAC/VDC | Voltage range | 0-440VAC/VDC | ||
Insulation Resistance | ≥1000MΩ/500VDC | Insulation Resistance | ≥1000MΩ/500VDC | ||
Lead wire spec. | AWG16# Tinned Teflon | Lead wire spec. | AWG22# Tinned Teflon | ||
Rated current | customed as request | ||||
Electrical noise | 10mΩ@6VDC,50mA,5Rpm | ||||
Dynamic resistance change | <0.01Ω | ||||
Mechanical Parameters | |||||
Mechanical Performance | Environmental Performance | ||||
Spec. | Data | Spec. | Data | ||
Working Life | > 50 million for ref(depends on working conditions) | Operating Temperature | -30C°±80C° | ||
Rated Speed | 300rpm (can be customized ) | Working Humidity | 0-85%RH | ||
Contact Material | Precious Metal, gold to gold (can be customized ) | Mechanical Vibration | MIL-SID-810E | ||
Shell Material | Aluminum Alloy (surface hard oxidation treatment) | IP Grade | IP51( IP65、IP68 Optional) | ||
Rotational Torque | 0.1N.M;+0.03N.M/ channel, Depends on connection size |
Options (Based on requirements)
Specification
Combined with power and signals
Pipe and ports size
Housing Material(Stainless Steel,Aluminum Alloy)
Working Temperature
Waterproof or not
Working speed(rpm)
JSR-MPS04XX Multi-channel Pneumatic Rotary Union(Slip Rings) | |||||
Model NO. | Passage(gas) | Port Size | Pipe Size | Power Circuits(10A) | Signal Circuits(5A) |
MPS04XX-6P10 | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 6 | 0 |
MPS04XX-6S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 0 | 6 |
MPS04XX-P1210 | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 12 | 0 |
MPS04XX-6P10-6S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 6 | 6 |
MPS04XX-12S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 0 | 12 |
MPS04XX-18P10 | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 18 | 0 |
MPS04XX-6P10-12S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 6 | 12 |
MPS04XX-P1210-6S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 12 | 6 |
MPS04XX-18S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 0 | 18 |
MPS04XX-S24 | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 0 | 24 |
MPS04XX-6P10-18S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 6 | 18 |
MPS04XX-30S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 0 | 30 |
MPS04XX-36S | 2 | M5、G1/8"、G1/4"、G3/8"、G1/2" Optional | 4MM、6MM、8MM、10MM、12MM、14MM Optional | 0 | 36 |
Note: N pieces of 5A current loops can be used as 1 channel of N*5A current loop; For example, 2 rings 5A can be used as 1 circuit 10A.*If no standard models are suitable, contact us for custom solutions directly, thanks. |
DIMENSION DRAWING
It is only a drawing example here. Normally it is OEM models as our customer's request,
Every design is based on different requirement.
Color Code For Lead Wires
Ring No. | Wire Color | Ring No. | Wire Color |
1 | Black | 7 | Purple |
2 | Red | 8 | Grey |
3 | Yellow | 9 | Orange |
4 | Green | 10 | Brown |
5 | Blue | 11 | Transparent |
6 | White | 12 | Light Green |
(Note: 12 colors are a group, with serial numbers 1...12, the next group repeats the first 12 colors, and each group is identified by a number tube as the group serial number.) |
MODEL NO.
APPLICATION FIELD
Printing Industry, Machine Tools, Wind Turbines, Food Processing machines, Indexing tables, packaging machinery, pneumatic clamps, rotary filling machine, automated systems, spinning machines, textile equipment, labeling machines, conveying systems, welding equipment
PACKAGE & DELIVERY
Package is by carton or by wooden.
Delivery: By Air, by Express, or by sea. Up to customers’ request.
Pneumatic rotary unions, also known as Pneumatic slip rings, pneumatic rotary joints or swivels, are devices used to transfer pressurized flow, air or gases from a stationary source to a rotating mechanism. They are preserving and isolating the fluid connection when devices are in 360 degree rotating.
These Pneumatic rotary unions are particularly essential in various industries where continuous rotary motion is involved, such as manufacturing, automotive, packaging, printing, robotics, and more. They enable the seamless transfer of air or gases, allowing pneumatic tools, actuators, or other pneumatic devices to function efficiently while rotating.
Pneumatic rotary unions are designed with channels or passages that permit the flow of compressed air, flow, or gases ensuring a constant and uninterrupted supply of pneumatic power, even as the connected equipment rotates. They typically consist of precision-engineered components, including seals, bearings, housing, and inlet and outlet ports, ensuring minimal leakage and friction, thus maximizing efficiency and reliability.
Our design of pneumatic rotary unions can based on different application requirements. Such as pressure, speed, media type, size, and environmental conditions are important factors in selecting the appropriate rotary union for a given application.
Besides, our Pneumatic rotary unions are in many range of sizes and configurations, accommodating different pressures, speeds, and specialized applications. They may be built to manage high-pressure pneumatic systems or designed for low-speed, high-torque applications for option.
Pneumatic rotary unions Some features are include:
1)Rotational Capability
2)Pressure Handling
3)Low Friction Seals
4)High Rotational Speeds for option
5)Durability and Reliability
6)Corrosion Resistance
7)Configurable Ports for option
8)Temperature Resistance
9)Customization and combined optional
Some details requested before design a Pneumatic rotary union:
1)Operating Pressure and Flow Rate
2)Media Type
3)Speed and RPM
4)Number of Passages or Channels
5)Temperature Range
6)Installation Space and Mounting
7)Environmental Conditions
It is only some series model samples here. If it can not find the model you need.
Contact us here. Let us know with your requirements. Our JARCH designer & engineer team have the full experiences to custom design and produce high reliable slip rings/rotary unions/rotary joints/connectors for you.